Foshan Jietong Power Supply Equipment Co., Ltd

JT'POWER - Jietong Power Rectifier Manufacturer & Supplier
  • +86-138-0268-7354
  • info@jt-rectifier.com

15V 1500A High-Frequency Switch-Mode Rectifier Systems for Precision PCB & Precious Metal Plating

Engineered for large-scale automated precious metal plating lines, high-density electronic connectors, and luxury automotive hardware finishing.

Tailored explicitly for high-value chemistries like cyanide gold and bright acid silver, this premier 1500A Precision SMPS Rectifier System incorporates optimized Silicon Carbide (SiC) MOSFET arrays to achieve non-stop operational stability under cleanroom factory strain.

✓ Deterministic Amperage Control (≤ ±0.1%): High-resolution digital feedback mechanisms deliver steady state accuracy, successfully eliminating current overshoot spikes and minimizing gold/silver salt oxidation waste.
✓ Elite Plating Filtration Matrix (≤ 0.5% RMS): Multi-stage LC wave filtering smooths switching harmonics across full boundaries, avoiding micro-pitting and eliminating dog-boning edge anomalies.
✓ Sealed Cleanroom Chassis Enclosure: Certified IP54 cabinet completely isolates microprocessor logic modules from aggressive cyanide fumes and acid mists to secure steady crack-free deposition outputs.

Micro-Stepped Precision ≤±0.1%
15V / 1500A GOLD & SILVER OPTIMIZED
IP54 Cleanroom Enclosure
JT-POWER high-precision PCB and precious metal rectifier 15V 1000A for gold, silver, and copper electroplating

Technical Specifications & Engineering Matrix (15V 1500A)

*All premium engineering parameters are fully scalable and customizable based on plant blueprints.

Deterministic Amperage Control
High-resolution digital closed-loop calibration mechanisms deliver a steady state control accuracy of ≤ ±0.1% Full Scale, successfully preventing current overshoot spikes and gold/silver salt oxidation waste.

Elite Wave-Filtering Matrix
Features multi-stage LC smooth filtration architecture to limit ripple components to ≤ 0.5% RMS across full operational boundaries, eliminating micro-pitting and securing pristine mirror brightness layers.

Phase-Shift SiC MOSFET Base
Powered by advanced high-frequency phase-shift full-bridge topologies with integrated Silicon Carbide (SiC) MOSFET module arrays, suppressing dynamic execution losses while operating at extreme efficiency.

Industry 4.0 Telemetry Gateway
Natively supports isolated RS485 Modbus RTU communication networks, fully adaptive for high-speed EtherCAT, Profinet, or standard 4-20mA analog telemetry inside multi-tank automated tracks.

Technical Parameters Standard Configuration Engineering Parametric Range
Output DC Current 0 — 1,500 Amperes (Micro-stepped adjustment) High-resolution step scaling tailored for continuous automated track lines
Output DC Voltage 0 — 15 Volts (Constant Voltage / Current) 6V / 12V / 24V Precise Output Customization Profiles
International Certification CE Attestation of Conformity Fully Compliant with EU LVD (2014/35/EU) & EMC (2014/30/EU)
Control Accuracy ≤ ±0.1% Full Scale Extreme regulation stability tailored for expensive reel-to-reel gold baths
Ripple Coefficient ≤ 0.5% RMS (Full Output Range) Pure low-pass multi-stage filtration loops to secure crystal grain refinement
Input Power Supply 3-Phase AC 380V/415V/480V ±10%, 50Hz/60Hz Global standard industrial grid input adaptive matching design
Cooling Framework Forced Air Cooling / Industrial Water Cooling Dual certified profiles (XLDF Forced-Air / XLDS Liquid-Loop)
Overall Efficiency ≥ 94% Premium high-frequency phase-shift full-bridge conversion with low copper losses
Automation Port Isolated RS485 Modbus RTU / 4-20mA / 0-10V Profinet / EtherCAT networks adaptive industrial host integration

Engineering Note: All JT-POWER high-frequency modular rectifier topologies utilize this premium standardized copper busbar routing to fundamentally reduce heating losses, simplify onsite module hot-swapping, and maximize continuous plant runtime limits.

Alt text: Internal structure diagram of JT-POWER high-power industrial electroplating rectifier showing component layout Equipment Structure Diagram: A clear understanding of the internal structure and functional components of the equipment.

Alt text: Internal structure of JT-POWER 30000A 15V high power switching rectifier for industrial electroplating

Technical Integrity Within: Microprocessor telemetry loops are isolated galvanically to secure runtime metrics against grid ripples.

Proprietary Patent Network & Custom Blueprinting Framework

Blueprint Adaptive

Built From Your Schematics & Plant Blueprints

Deploying a new industrial plant or restructuring existing bays? Simply forward us your mechanical blueprints or station layouts, and our engineering team will build custom enclosures to fit perfectly.

Patent No

Proprietary High-Frequency Transformer (Patent No: ZL 2019 2 1905918.5)

Incorporating our elite magnetic core matrix engineering, the system directs massive energies with near-zero leakage inductance, heavily reducing continuous cabinet heat dissipation boundaries.

Patent No

Integrated Thermal Dissipation Base (Patent No: ZL 2019 3 0679510.X)

Utilizing our patented copper heavy cooling substrate arrays, critical junction thermal vectors route outward instantly, expanding equipment lifetime margins under constant 24/7 industrial loads.

Isolated Bus

Fully Galvanic Sealed Controller Vault

Our core microprocessor systems are completely sealed away from plant vapors, blocking aggressive common-mode noise and cross-talk ground feedback errors natively.

Industrial Automation & Network Architecture

Designed for seamless integration into heavy-duty processing plants, the system features a robust digital telemetry link. An optically isolated RS485 communication hub running standard Modbus RTU protocols establishes a noise-resistant network directly to centralized control nodes, supporting up to 32 multi-unit power clusters simultaneously. High-speed interfacing allows for instantaneous current ramp-up programming, multi-stage tank recipe cycling, continuous thermal logging, and micro-second fault diagnostic reporting back to the primary industrial PLC master grid.

industrial-rectifier-network-centralized-monitoring-system.jpg

Industrial Site Deployment & Global Logistics

1. Split-Modular Secure Shipping
To ensure maritime safety and facilitate crane-lifting within space-limited facilities, our heavy-duty 8000A systems utilize split-modular enclosure configurations. Units are encapsulated within ISPM-15 compliant sea-worthy wooden cases, lined with industrial moisture-proof membranes to guard against high-salinity marine corrosion.
2. International Logistics Handling
Consignments reach sea-readiness within a standard 30-45 business day production cycle. We provide full export logistics covering global industrial sea-freight solutions, compliant with international trade codes including FOB port, CIF seaport, and full DDP factory-integration processes.
3. Engineering Audit & Commissioning Support
We provide complete engineering blueprints, circuit schematics, internal component lists, and busbar configuration data to facilitate facility audits. Turnkey remote commissioning support, custom reverse-polarity programming loops, and complete device tracking arrays are provided for factory scalability.
Alt text: Heavy-duty wooden case packaging for secure export shipping of hard chrome plating rectifier

⚡ 100% Flexible Engineering & Bespoke Parameter Customization

Require specific voltage/current curves, dedicated reverse-polarity switching, or custom dimensions to fit your existing tanks? We customize equipment of any power rating (100A to 100,000A+) and voltage (6V to 150V+) based strictly on your factory blueprints.

Please submit your required specification below for a technical consultation.
👇👇👇

15V 1500A High-Frequency Switch-Mode Rectifier Systems for Precision PCB & Precious Metal Plating

Engineered for large-scale automated precious metal plating lines, high-density electronic connectors, and luxury automotive hardware finishing.

Tailored explicitly for high-value chemistries like cyanide gold and bright acid silver, this premier 1500A Precision SMPS Rectifier System incorporates optimized Silicon Carbide (SiC) MOSFET arrays to achieve non-stop operational stability under cleanroom factory strain.

✓ Deterministic Amperage Control (≤ ±0.1%): High-resolution digital feedback mechanisms deliver steady state accuracy, successfully eliminating current overshoot spikes and minimizing gold/silver salt oxidation waste.
✓ Elite Plating Filtration Matrix (≤ 0.5% RMS): Multi-stage LC wave filtering smooths switching harmonics across full boundaries, avoiding micro-pitting and eliminating dog-boning edge anomalies.
✓ Sealed Cleanroom Chassis Enclosure: Certified IP54 cabinet completely isolates microprocessor logic modules from aggressive cyanide fumes and acid mists to secure steady crack-free deposition outputs.

Micro-Stepped Precision ≤±0.1%
15V / 1500A GOLD & SILVER
IP54 Cleanroom Enclosure
JT-POWER high-precision PCB and precious metal rectifier 15V 1000A for gold, silver, and copper electroplating

Technical Specifications & Engineering Matrix (15V 1500A)

*All premium engineering parameters are fully scalable and customizable based on plant blueprints.

Deterministic Amperage Control
High-resolution digital closed-loop calibration mechanisms deliver a steady state control accuracy of ≤ ±0.1% Full Scale, successfully preventing current overshoot spikes and gold/silver salt oxidation waste.

Elite Wave-Filtering Matrix
Features multi-stage LC smooth filtration architecture to limit ripple components to ≤ 0.5% RMS across full operational boundaries, eliminating micro-pitting and securing pristine mirror brightness layers.

Phase-Shift SiC MOSFET Core
Powered by advanced high-frequency phase-shift full-bridge topologies with integrated Silicon Carbide (SiC) MOSFET module arrays, suppressing dynamic execution losses while operating at extreme efficiency.

Industry 4.0 Telemetry Gateway
Natively supports isolated RS485 Modbus RTU communication networks, fully adaptive for high-speed EtherCAT, Profinet, or standard 4-20mA analog telemetry inside multi-tank automated tracks.

Output DC Current
0 — 1,500 Amperes (Micro-stepped adjustment)
High-resolution step scaling tailored for continuous automated track lines.

Output DC Voltage
0 — 15 Volts (Constant Voltage / Current)
6V / 12V / 24V Precise Output Customization Profiles.

Control Accuracy
≤ ±0.1% Full Scale
Extreme regulation stability tailored for expensive reel-to-reel gold baths.

Ripple Coefficient
≤ 0.5% RMS (Full Output Range)
Pure low-pass multi-stage filtration loops to secure crystal grain refinement layout metrics natively.

Input Power Supply
3-Phase AC 380V/415V/480V ±10%
Global standard industrial grid input adaptive matching configuration design (50Hz/60Hz).

Overall Efficiency
≥ 94% Conversion Lock
Premium high-frequency phase-shift full-bridge conversion with low copper losses routing.

Automation Port
Isolated RS485 Modbus RTU / 4-20mA / 0-10V
Profinet / EtherCAT networks adaptive industrial host integration sync topologies.

Engineering Note: All JT-POWER high-frequency modular rectifier topologies utilize this premium standardized copper busbar routing to fundamentally reduce heating losses, simplify onsite module hot-swapping, and maximize continuous plant runtime limits.

Internal structure diagram of JT-POWER high-power industrial electroplating rectifier showing component layout

System Topology Outline: Cross-sectional mapping of internal structural routing layouts and optimized functional power cell integration.

Internal structure of JT-POWER 30000A 15V high power switching rectifier for industrial electroplating

Technical Integrity Within: Microprocessor telemetry loops are isolated galvanically to secure runtime metrics against grid ripples.

Proprietary Patent Network & Blueprinting Matrix

Blueprint Adaptive
Built From Your Schematics & Plant Blueprints
Forward your mechanical blueprints or station layouts. Our engineering team will build custom enclosures to fit perfectly into your technical bays natively.
Patent No: ZL 2019 2 1905918.5
Proprietary High-Frequency Transformer Matrix
Incorporates elite magnetic core matrix engineering to direct massive energy with near-zero leakage inductance, heavily reducing heavy-power heat signatures.
Patent No: ZL 2019 3 0679510.X
Integrated Thermal Dissipation Copper Base
Patented copper heavy substrates route junction thermal vectors outward instantly, maximizing equipment system runtime parameters under constant continuous loads.
Isolated Bus
Fully Galvanic Sealed Controller Vault
Core microprocessor telemetry structures are entirely sealed away from plant vapors, blocking aggressive common-mode noise and ground loop feedback errors.

Industrial Automation & Network Architecture

Designed for seamless integration into heavy-duty processing plants, the system features a robust digital telemetry link. An optically isolated RS485 communication hub running standard Modbus RTU protocols establishes a noise-resistant network directly to centralized control nodes, supporting up to 32 multi-unit power clusters simultaneously. High-speed interfacing allows for instantaneous current ramp-up programming, multi-stage tank recipe cycling, continuous thermal logging, and micro-second fault diagnostic reporting.

Industrial rectifier centralized monitoring network system diagram with Master control and central server

Network Control System: Optical isolation hub with Modbus/Industrial Ethernet telemetry solution for centralized monitoring up to N≤32 clusters natively.

Industrial Site Deployment & Global Logistics

Step 01
Split-Modular Secure Shipping
Heavy-duty systems utilize split-modular configurations for limited site access. Units are sealed in ISPM-15 compliant sea-worthy wooden cases with moisture membranes to prevent maritime corrosion.
Step 02
International Logistics Handling
Consignments reach sea-readiness within a standard 30-45 business day production cycle. We provide full export logistics covering FOB port, CIF seaport, and global DDP factory-integration protocols.
Step 03
Engineering Audit & Commissioning Support
Complete engineering blueprints, circuit schematics, and busbar layouts are supplied for facility audits. Turnkey remote commissioning loops and tracking arrays are fully provided.
Heavy-duty wooden case packaging for secure export shipping of hard chrome plating rectifier

⚡ 100% Flexible Engineering & Bespoke Parameter Customization

Require specific voltage/current curves, dedicated reverse-polarity switching, or custom dimensions to fit your existing tanks? We customize equipment of any power rating (100A to 100,000A+) and voltage (6V to 150V+) based strictly on your factory blueprints.

Please submit your required specification below for a technical consultation.
👇👇👇
Back
JT-POWER 15V 1000A high-frequency pulse DC rectifier system with independent remote control box and SiC topologies for precision PCB line and precious metal gold silver electroplating
Leave Message

Related Products

Direct Engineering Hotline
+86-138-0268-7354
Global Sales Support
info@jt-rectifier.com
Technical Support Matrix
info@jt-rectifier.com
Proceed to Official Inquiry Page

Response within 24 hours

Section 1: Application & Plating Process FAQ 🛰️
How does this 1000A rectifier improve blind via filling on high-density HDI boards?
Our advanced power topology ensures exceptional throwing power inside microvias, preventing dimples and center voids, making it the premier choice for high-yield HDI PCB electroplating rectifiers deployment.
Does this 15V system support high-frequency Pulse Reverse Plating (PPR)?
Yes, the hardware architecture is fully optimized for rapid forward and reverse pulse modulations, providing the exact current waveforms needed for a high-aspect-ratio pulse reverse copper plating power supply.
Is this rectifier stable enough for continuous high-speed reel-to-reel gold plating?
Absolutely. It features zero-drift current regulation that guarantees uniform gold and palladium deposits on fast-moving strip materials, establishing itself as a rock-solid reel to reel precious metal rectifier.
What is the current ripple factor, and how does it affect copper layer ductility?
The current ripple is strictly capped at ≤0.5% RMS. This ultra-low threshold eliminates granular crystallization defects, optimizing elongation properties for demanding low ripple PCB plating rectifiers applications.
Can this 15V 1000A unit manage fractional currents for IC substrate micro-bumping?
Yes, its wide dynamic range allows stable operation even at single-digit currents, delivering the precise, ripple-free execution required by advanced semiconductor IC substrate power supplies lines.
Section 2: Hardware Architecture & Enclosure FAQ 🔧
How does the enclosure resist heavy sulfuric acid and cyanide vapors in PCB lines?
The chassis features a fully isolated cooling duct system combined with multi-layer epoxy anti-corrosion treatments, ensuring long-term survivability as a dedicated anti corrosion PCB plating power supply.
What are the hardware response advantages of the embedded Silicon Carbide switches?
By utilizing high-frequency Silicon Carbide (SiC) MOSFETs switching at 100kHz, the unit achieves microsecond-level gating control and unmatched power density for high frequency SiC rectifiers 1000A setups.
Are the 1000A output terminals designed to prevent thermal hotspots over long shifts?
We utilize massive, high-purity T2 red copper busbars with heavy silver plating. This restricts contact resistance and keeps full-load operating temperature delta at ΔT≤30°C, a core standard of our heavy duty copper busbar rectifiers.
Can multiple 1000A units be stacked together in a centralized server rack setup?
Yes. The chassis layout utilizes a front-in and rear-out forced air configuration, eliminating heat recirculation and allowing seamless high-density integration inside a standard rack mountable industrial rectifier frame.
How does the main high-frequency transformer handle continuous pulse switching stress?
The transformer utilizes advanced nanocrystalline cores wound with multi-strand Litz wire, preventing magnetic saturation and heat buildup during fast polarity changes in this high switching transformer power supply block.
Section 3: Digital Controls & Automation FAQ 🔬
Which hardware processor core drives the high-speed pulse synchronization loops?
The control board is anchored by a high-performance industrial microcontroller, executing complex PID loops with zero phase jitter to deliver a true microcontroller programmable PCB rectifier core.
How does this rectifier interface with centralized automated VCP line controllers?
The system comes with an isolated RS485 Modbus-RTU network interface and supports Profinet upgrades, ensuring low-latency communication with main PLCs on a Profinet compatible digital rectifier line.
What is the digital setting resolution for precise precious metal dosing?
The high-contrast control panel allows micro-tuning adjustments down to 0.01V and 0.1A, providing the exact parameter granularity required for an elite precision digital precious metal rectifier cabinet.
How fast does the short-circuit system react if a PCB panel touches an anode basket?
The digital logic senses overcurrent and arcing thresholds instantly, executing an electronic shutdown in less than 10 microseconds to outclass regular fast response fault protected rectifiers.
Does the firmware include a built-in Ampere-Hour meter for tracking additive consumption?
Yes, a high-accuracy, digital Ampere-Hour tracking routine is embedded natively, allowing automatic dosing signals and accurate data syncing through smart ampere hour control rectifiers pipelines.
Chat Now
Whatsapp
Email
Inquiry