Foshan Jietong Power Supply Equipment Co., Ltd

JT'POWER - Jietong Power Rectifier Manufacturer & Supplier
  • +86-138-0268-7354
  • info@jt-rectifier.com

12V 200A Laboratory Precision Benchtop Rectifier for Precision Electroplating

Engineered to meet the deterministic standards of advanced university laboratories, medical device plating, and premium jewelry craftsmanship.

Optimized for high-value precious metals—such as gold, silver, platinum, and rhodium—this high-precision 200A Lab-Grade Rectifier utilizes discrete SiC MOSFET soft-switching topologies to completely eliminate microscopic coating internal stress.

✓ Deterministic Control Accuracy (≤ ±0.1%): High-resolution micro-stepped digital feedback loops stabilize voltage and current metrics instantly, preventing current crowding or power surge spikes on delicate micro-substrates.
✓ Ultra-Low Plating Ripple (≤ 0.5% RMS): Calibrated specifically for high-value thin-layer runs to eliminate structural defects, coarse grain structures, and edge burnt-marks.
✓ Sealed Vapour Isolation Chassis: Driving logic channels are encapsulated inside an isolated zone, blocking aggressive ambient acid-base chemical vapors inside lab hoods.
Deterministic Control ≤ ±0.1%
12V / 200A Lab Scales
IP54 Sealed Lab Box
JT-POWER high-precision laboratory rectifier 12V 200A for R&D testing and small scale electroplating

Technical Specifications & Engineering Matrix (12V 200A)

*All compact engineering parameters are fully scalable to individual laboratory station and line layouts.

Deterministic Regulation Control
High-resolution micro-stepped digital feedback loops deliver an elite steady control accuracy of ≤ ±0.1% Full Scale, preventing current crowding or power surge spikes on delicate wafer micro-substrates.
Pure Smooth Wave Matrix
Calibrated specifically for precious micro-thickness layers, maintaining a low harmonic ripple coefficient ≤ 0.5% RMS across all ranges to completely eliminate coating internal stress and coarse grain development.
Discrete SiC MOSFET Topology
Powered by discrete high-frequency Silicon Carbide (SiC) MOSFET soft-switching architectures, pushing thermal durability boundaries while operating flawlessly under universal 1-phase adaptive grids.
Automated Automation Gateway
Integrates an isolated RS485 Modbus RTU interface alongside 0-10V analog channels, supporting scalable matching with Ethernet or Profinet digital central laboratory automation loops.
Technical Parameters Standard Configuration Engineering Parametric Range
Output DC Current 0 — 200 Amperes (Micro-stepped adjustment) High-resolution ultra-fine tuning closed-loop control options
Output DC Voltage 0 — 12 Volts (Constant Voltage / Current) 6V / 15V / 24V Precise Output Customization Layouts
International Certification CE Attestation of Conformity Fully Compliant with EU LVD (2014/35/EU) & EMC (2014/30/EU)
Control Accuracy ≤ ±0.1% Full Scale Extreme regulation stability tailored for precious metal lines
Ripple Coefficient ≤ 0.5% RMS (Full Output Range) Pure smooth wave output filtering framework for wafer deposition
Input Power Supply 1-Phase AC 110V/220V/230V Adaptive, 50Hz/60Hz Global universal laboratory grid adaptive matching configuration
Thermal Framework Forced Air Cooling / Sealed Water Cooling Dual CE certified profiles (XLDF Forced-Air / XLDS Liquid-Loop)
Remote Automation Port Isolated RS485 Modbus RTU / 0-10V Analog Profinet / Ethernet digital host automation software alignment
Overall Power Efficiency ≥ 92% Optimized switch-mode energy tracking loops
Duty Cycle & Protection 100% Continuous Duty with Over-voltage cut-off Intelligent microsecond fault self-diagnosis & tracking data records

Engineering Note: All JT-POWER high-frequency modular rectifier topologies utilize this premium standardized copper busbar routing to fundamentally reduce heating losses, simplify onsite module hot-swapping, and maximize continuous plant runtime limits.

Alt text: Internal structure diagram of JT-POWER high-power industrial electroplating rectifier showing component layout Equipment Structure Diagram: A clear understanding of the internal structure and functional components of the equipment.

Alt text: Internal structure of JT-POWER 30000A 15V high power switching rectifier for industrial electroplating

Technical Integrity Within: Microprocessor telemetry loops are isolated galvanically to secure runtime metrics against grid ripples.

Proprietary Patent Network & Custom Blueprinting Framework

Blueprint Adaptive

Built From Your Schematics & Plant Blueprints

Deploying a new industrial plant or restructuring existing bays? Simply forward us your mechanical blueprints or station layouts, and our engineering team will build custom enclosures to fit perfectly.

Patent No

Proprietary High-Frequency Transformer (Patent No: ZL 2019 2 1905918.5)

Incorporating our elite magnetic core matrix engineering, the system directs massive energies with near-zero leakage inductance, heavily reducing continuous cabinet heat dissipation boundaries.

Patent No

Integrated Thermal Dissipation Base (Patent No: ZL 2019 3 0679510.X)

Utilizing our patented copper heavy cooling substrate arrays, critical junction thermal vectors route outward instantly, expanding equipment lifetime margins under constant 24/7 industrial loads.

Isolated Bus

Fully Galvanic Sealed Controller Vault

Our core microprocessor systems are completely sealed away from plant vapors, blocking aggressive common-mode noise and cross-talk ground feedback errors natively.

Industrial Automation & Network Architecture

Designed for seamless integration into heavy-duty processing plants, the system features a robust digital telemetry link. An optically isolated RS485 communication hub running standard Modbus RTU protocols establishes a noise-resistant network directly to centralized control nodes, supporting up to 32 multi-unit power clusters simultaneously. High-speed interfacing allows for instantaneous current ramp-up programming, multi-stage tank recipe cycling, continuous thermal logging, and micro-second fault diagnostic reporting back to the primary industrial PLC master grid.

industrial-rectifier-network-centralized-monitoring-system.jpg

Industrial Site Deployment & Global Logistics

1. Split-Modular Secure Shipping
To ensure maritime safety and facilitate crane-lifting within space-limited facilities, our heavy-duty 8000A systems utilize split-modular enclosure configurations. Units are encapsulated within ISPM-15 compliant sea-worthy wooden cases, lined with industrial moisture-proof membranes to guard against high-salinity marine corrosion.
2. International Logistics Handling
Consignments reach sea-readiness within a standard 30-45 business day production cycle. We provide full export logistics covering global industrial sea-freight solutions, compliant with international trade codes including FOB port, CIF seaport, and full DDP factory-integration processes.
3. Engineering Audit & Commissioning Support
We provide complete engineering blueprints, circuit schematics, internal component lists, and busbar configuration data to facilitate facility audits. Turnkey remote commissioning support, custom reverse-polarity programming loops, and complete device tracking arrays are provided for factory scalability.
Alt text: Heavy-duty wooden case packaging for secure export shipping of hard chrome plating rectifier

⚡ 100% Flexible Engineering & Bespoke Parameter Customization

Require specific voltage/current curves, dedicated reverse-polarity switching, or custom dimensions to fit your existing tanks? We customize equipment of any power rating (100A to 100,000A+) and voltage (6V to 150V+) based strictly on your factory blueprints.

Please submit your required specification below for a technical consultation.
👇👇👇

12V 200A Laboratory Precision Benchtop Rectifier for Precision Electroplating

Engineered to meet the deterministic standards of advanced university laboratories, medical device plating, and premium jewelry craftsmanship.

Optimized for high-value precious metals—such as gold, silver, platinum, and rhodium—this high-precision 200A Lab-Grade Rectifier utilizes discrete SiC MOSFET soft-switching topologies to completely eliminate microscopic coating internal stress.

✓ Deterministic Control Accuracy (≤ ±0.1%): High-resolution micro-stepped digital feedback loops stabilize voltage and current metrics instantly, preventing current crowding or power surge spikes on delicate micro-substrates.
✓ Ultra-Low Plating Ripple (≤ 0.5% RMS): Calibrated specifically for high-value thin-layer runs to eliminate structural defects, coarse grain structures, and edge burnt-marks.
✓ Sealed Vapour Isolation Housing: Sealed internal enclosures shield critical microprocessor logic boards from airborne chemical droplets, securing continuous cleanroom reliability.

1500A / 15V PRECISE DC
LOW RIPPLE ≤ 0.5% RMS
GOLD & SILVER MATCHED
JT-POWER high-precision precious metal rectifier 15V 1500A for gold and silver plating - main product view

Technical Specifications & Operational Matrix (15V 1500A Base)

*Heavy industrial performance attributes verified under full-load continuous factory testing limits.

Deterministic Amperage Lock
Sustains a flat full-load continuous output of 1,500 Amperes and 15 Volts DC. High-resolution digital feedback mechanisms deliver steady state constant precision down to micro-current layers.

Elite Pure Ripple Control
Features proprietary multi-stage low-pass filtering matrices to suppress switching noise to ≤ 0.5% RMS, securing uniform metallic crystal deposition and mirror plating brightness curves.

Phase-Shift SiC MOSFET Base
Powered by premium high-frequency full-bridge switch-mode topologies running discrete Silicon Carbide (SiC) module hardware nodes, lowering reactive energy expenditure cleanly.

SCADA Automated Telemetry
Fully compliant with CE standards. Features optically isolated feedback loops supporting standard Modbus RTU protocols or optional Profinet lines for seamless synchronization to central control rooms.

Output DC Amperage
1500 Amperes (Fully Adjustable Range)
High-resolution step scaling matched cleanly for continuous automated lines.

Output DC Voltage
15 Volts DC Base Headroom
Constant Voltage (CV) / Constant Current (CC) automatic switching matrix loops.

Power Factor
≥ 0.95 (At Full Rated Continuous Load)
High-efficiency architecture minimizing reactive power losses and line harmonic overheads.

Regulation Precision
≤ ±0.1% Full Scale Calibration
Extreme regulation stability tailored cleanly for high-value precious coating tank houses.

Ripple Coefficient
≤ 0.5% RMS (Full Output Range)
Pure wave filtering optimized fully for uniform film crystalline thickness indicators natively.

Input Power Supply
1-Phase AC 110V/220V/230V Adaptive
Global universal laboratory grid adaptive matching configuration (50Hz/60Hz) design fields smoothly.

Operating Cycle
100% Full-Load Continuous 24/7 Duty
Engineered meticulously to run flawlessly inside technical automated cleanroom environments.

Engineering Note: All JT-POWER high-frequency modular rectifier topologies utilize this premium standardized copper busbar routing to fundamentally reduce heating losses, simplify onsite module hot-swapping, and maximize continuous plant runtime limits.

Internal structure diagram of JT-POWER high-power industrial electroplating rectifier showing component layout

System Topology Outline: Cross-sectional mapping of internal structural routing layouts and optimized functional power cell integration.

Internal structure of JT-POWER 30000A 15V high power switching rectifier for industrial electroplating

Technical Integrity Within: Microprocessor telemetry loops are isolated galvanically to secure runtime metrics against grid ripples.

Proprietary Patent Network & Blueprinting Matrix

Blueprint Adaptive
Built From Your Schematics & Plant Blueprints
Forward your mechanical blueprints or station layouts. Our engineering team will build custom enclosures to fit perfectly into your technical bays natively.
Patent No: ZL 2019 2 1905918.5
Proprietary High-Frequency Transformer Matrix
Incorporates elite magnetic core matrix engineering to direct massive energy with near-zero leakage inductance, heavily reducing heavy-power heat signatures.
Patent No: ZL 2019 3 0679510.X
Integrated Thermal Dissipation Copper Base
Patented copper heavy substrates route junction thermal vectors outward instantly, maximizing equipment system runtime parameters under constant continuous loads.
Isolated Bus
Fully Galvanic Sealed Controller Vault
Core microprocessor telemetry structures are entirely sealed away from plant vapors, blocking aggressive common-mode noise and ground loop feedback errors.

Industrial Automation & Network Architecture

Designed for seamless integration into heavy-duty processing plants, the system features a robust digital telemetry link. An optically isolated RS485 communication hub running standard Modbus RTU protocols establishes a noise-resistant network directly to centralized control nodes, supporting up to 32 multi-unit power clusters simultaneously. High-speed interfacing allows for instantaneous current ramp-up programming, multi-stage tank recipe cycling, continuous thermal logging, and micro-second fault diagnostic reporting.

Industrial rectifier centralized monitoring network system diagram with Master control and central server

Network Control System: Optical isolation hub with Modbus/Industrial Ethernet telemetry solution for centralized monitoring up to N≤32 clusters natively.

Industrial Site Deployment & Global Logistics

Step 01
Split-Modular Secure Shipping
Heavy-duty systems utilize split-modular configurations for limited site access. Units are sealed in ISPM-15 compliant sea-worthy wooden cases with moisture membranes to prevent maritime corrosion.
Step 02
International Logistics Handling
Consignments reach sea-readiness within a standard 30-45 business day production cycle. We provide full export logistics covering FOB port, CIF seaport, and global DDP factory-integration protocols.
Step 03
Engineering Audit & Commissioning Support
Complete engineering blueprints, circuit schematics, and busbar layouts are supplied for facility audits. Turnkey remote commissioning loops and tracking arrays are fully provided.
Heavy-duty wooden case packaging for secure export shipping of hard chrome plating rectifier

⚡ 100% Flexible Engineering & Bespoke Parameter Customization

Require specific voltage/current curves, dedicated reverse-polarity switching, or custom dimensions to fit your existing tanks? We customize equipment of any power rating (100A to 100,000A+) and voltage (6V to 150V+) based strictly on your factory blueprints.

Please submit your required specification below for a technical consultation.
👇👇👇
Back
JT-POWER 12V 200A laboratory grade precision high-frequency pulse DC rectifier with independent remote control box and SiC MOSFET topologies for electro-oxidation and precision plating tests.
Leave Message

Related Products

Direct Engineering Hotline
+86-138-0268-7354
Global Sales Support
info@jt-rectifier.com
Technical Support Matrix
info@jt-rectifier.com
Proceed to Official Inquiry Page

Response within 24 hours

Section 1: Application & Plating Process FAQ 🛰️
Is this 12V 200A rectifier precise enough for highly repeatable scientific experiments?
Yes, absolutely. This system eliminates parameter drifting caused by component heating, guaranteeing absolute consistency for data logging across weeks of testing, making it the benchmark laboratory precision rectifiers option for global universities.
How does the low ripple output impact micro-nano scale electrodeposition?
With a current ripple factor tightly regulated at ≤0.1% RMS, the ultra-clean channel protects sensitive crystal lattice growth from high-frequency harmonic distortion, providing premium filtering for a low ripple laboratory power supply block.
Can this 200A unit manage high-sensitivity hydrogen embrittlement research?
Yes. The continuous, flat-line DC tracking ensures highly smooth current transitions during electrolysis, minimizing parasitic hydrogen outgassing patterns required in advanced precision electrolysis rectifiers operations.
Does the power supply support ultra-low starting currents for rare precious metals?
Designed with wide-range dynamic control limits, it stably regulates output even at fractional ampere ranges, preventing burning or wasting material on a precious metal electrodeposition power supply workbench.
How fast can this unit cycle currents for dynamic electrochemical applications?
The embedded high-speed feedback algorithms allow rapid current switching and polarity manipulation without triggering voltage spikes, ideal for a modern programmable electrochemical power supply line.
Section 2: Hardware Architecture & Enclosure FAQ 🔧
How much benchtop workspace can I save with this compact 200A enclosure?
The machine features a lightweight, high-density 19-inch rack-mountable or desktop design. It optimizes physical laboratory footprints by nearly 45% compared to analog units, acting as an ultra-compact benchtop industrial rectifier 200A box.
Will the high-frequency switching noise interfere with neighboring analytical instruments?
Not at all. The heavy-duty chassis incorporates full-enclosure Faraday shielding paired with integrated industrial EMI input/output filters, securing its classification as an ultra-clean low EMI electroplating rectifier setup.
What are the thermal and energy-efficiency advantages of its internal architecture?
By adapting a high-frequency Silicon Carbide (SiC) switching topology, internal heat loss is minimized, resulting in a cooler operating temperature and unmatched conversion efficiency for a high efficiency R&D rectifier.
Is the cooling fan noise low enough to operate comfortably inside a quiet laboratory?
Yes. The unit integrates intelligent variable-speed cooling fans that only spin up under heavy thermal loads, keeping ambient acoustic noise to a minimum for a quiet cooling laboratory dc power supply workspace.
Are the output connections safe for researchers who frequently swap test electrodes?
The rear panel is fitted with heavy-duty insulated binding terminals or solid silver-plated blocks, offering maximum mechanical grip and anti-accidental touch safety on all safe terminal 12V rectifiers interfaces.
Section 3: Digital Controls & Automation FAQ 🔬
What processor architecture ensures the extreme tuning stability of the system?
The system is governed by a dedicated industrial microcontroller, managing high-frequency PWM gating with zero thermal drifting to outperform regular analog microprocessor control laboratory rectifier cards.
Can I automate this rectifier remotely using LabVIEW, MATLAB, or Python scripts?
Yes, seamlessly. The isolated RS485 interface utilizes standard Modbus-RTU protocols, letting engineers deploy custom automation scripts and live tracking profiles via a LabVIEW programmable digital rectifier environment.
What is the absolute voltage and current setting resolution on the HMI panel?
The ultra-fine digital control system delivers a premium display resolution down to 0.01V and 0.01A/0.1A, offering the strict tuning granularity needed for high-resolution high resolution precision rectifiers.
How does the self-diagnostic safety matrix behave if a test lead accidentally snaps?
The digital firmware detects instantaneous circuit breaks or short circuits within milliseconds, immediately locking down power output to safeguard expensive anode materials as a smart diagnostic protective rectifier.
Does the internal interface support pre-programmed multi-step ramp sequences?
Yes. Users can configure and store intricate multi-segment current/voltage ramp profiles directly into memory, providing automated hands-free control for sophisticated automated recipe electrochemical rectifiers runs.
Chat Now
Whatsapp
Email
Inquiry